Our GroWall System is a uniquely designed Aeroponics system that, enables our customers the option of growing all of their favorite indoor plants, herbs, leafy vegetables and any other small to mid-sized plants in any indoor environment in the most convenient, cost-effective, efficient, easy and appealing way possible using our unique vertical wall mounted aeroponics products and techniques.
Aeroponics is by far proven to be the most efficient process
for growing a wide
variety of vegetation with the least amount of resources while, consuming
the least amount of real estate required to produce the healthiest, freshest homegrown
sustainable produce from the comfort of your own home all year round.
Unlike most other aeroponics systems which, typically consist of either; a series of bulky PVC pipes bolted to a wall and linked together consuming all of the available real estate of walls they're installed on with large barrel reservoirs used to retain the water used to feed them or, are large bulky individual vertical towers that consume much of the available floor space within the room(s) they're kept, the GroWall System is designed to be vertically mounted flush against each wall they're installed on to keep them out of the way with the smallest floor space profile possible -substantially reducing the required amount of real estate needed for the amount of food grown within them.
This allows you to grow far more produce versus
other aeroponics assemblies inch by inch and pound for pound.
This also greatly reduces demands for bulky water reservoirs and
additional supporting resources and assemblies to retain and cycle the nutrient rich
water required to keep the
plants growing healthy all year round.
Altogether, this far more efficient approach to food production demands far less space, nutrients, electrical power and
water resources to grow all your preferred indoor plants and produce all year round. Review the details for each of the various individual components that make up our GroWall System assembly below.
Each standard GroWall System Cell
is uniquely designed to easily mount independently to any wall with two typical carpenter's screws and,
conveniently vertically stack together with no additional components
required. The lowest cell inserts into the GroWall System Reservoir and, the GroWall System Cell Plug securely attaches to the uppermost cell -to keep the nutrient rich water being cycled through the system contained in leak-free fashion.
Product Details:
Each standard GroWall System Cell measures a mere 90mm (3.54 in.) wide, 83.8mm (3.3 in.) from the wall and, are
110.2mm (4.34 in.) tall -making them small enough to
easily fit within the palm of your hand and, vertically mount in any out of the way spaces you'd prefer to grow all your homegrown produce in.
Each cell also has two slip-in screw brackets built into the upper
portion of the back panel (sized for any 4mm diameter thick carpenter's
screws) to allow them to be securely mounted to any wall with ease.
They each have a single support footer built into the lower portion of the back panel that, allows
each cell to rest vertically flush with the wall with 2mm of spacing
between the panel and the wall.
Each cell has a
built-in misting line with a 1mm misting port aimed directly at the net
cup/pot port -to keep the roots of your plants moist with a mist of nutrient
rich water. Water is pumped to the first lowest cell in the series from the GroWall
System Reservoir where it will then feed all excess
water up to each other cell in the series in turn before it drains back down the cell series into the reservoir.
The lowest cell easily connects to your
GroWall System Reservoir by
simply inserting it into the dual sleeved nozzle connector ports located
on top of the reservoir. The rear pipeline port nozzle is used for
pumping water up into the cell series installed in
your GroWall System assembly and, the forward drainage port
allows water to drain back into the reservoir. Both of these ports are
located
on the bottom of every cell and, easily inserts into each of the matching
pipeline nozzle ports on top of every GroWall System Cell. Together,
these pipeline nozzle ports allow
you to easily stack multiple cells in series offering a water tight seal throughout the entire pipeline assembly.
The 1.5 inch diameter Net Cup/Net Pot port of each cell can fit most
standard sized 1 to 1-1/2 inch hydroponics/aeroponics net cup/net pot sizes.
The GroWall System Cell's enclosed well design allows plenty of space for roots to grow to the plants full mature harvest size.
Our
GroWall System Cells come in 10 different color varieties and, are all 3D
printed from strong, durable versatile plastic as soon as you order them. In this, we endeavor to eliminate many of the most common environmental issues associated with traditional product mass production processes while, providing you with the highest level of quality products in a way that ensures they'll last
for years of continuous use.
This large version of our GroWall System Reservoir Base product line is specifically designed for larger water pumps and GroWall System assemblies offering you as much vertical growing space as your ceiling height will allow.
This product is meant for producing larger quantities of plants for either residential or commercial applications of our vertical aeroponics GroWall System products. With the capacity to produce more plants per square foot than any other aeroponics system on the market today, the only limits to its production capabilities are pump size used with the assembly and the limit of the growing facility's ceiling heights.
Product Details:
Still only measuring 110mm (4 - 1/2 in.) wide, 110mm (4 - 1/2 in.) from the
wall and, 350mm (12 in.) tall and, with a fill volume of roughly 3.33 liters
(4/5ths of a gallon) -they are still small enough to easily stand upright
within the palm of your hand. Yet, are able to hold and cycle enough
water throughout your GroWall System assembly to keep your plants
growing healthy and strong all year round.
Each of our GroWall System Reservoir Base's are designed to snugly
fit against any flat vertical surface with its flat backed profile and,
on any flat horizontal surface with its flat bottom design. Its 1-ft
deep vertical well design ensures your submersible water pump will make
the most of the .87 gallons of water it contains to keep your plants fed
with nutrient rich mist throughout the entirety of its use.
* Note that this large version of our GroWall System Reservoir Base is only available in 3D printed white natural versatile plastic from our online 3D printable product store, RFCINCo Designs which, ensures a solid quality product that will last for years of routine use with every order.
This small version of our GroWall System Reservoir Base product line
is specifically suited for smaller water pumps and GroWall System
assemblies for use primarily in residential and small scaled commercial applications. Each of our GroWall System Reservoir Base's are designed
with a flat-backed profile (to snugly fit against any flat vertical
surface) with a flat bottom that allows it to rest sturdy on any flat
horizontal surface.
Ideally suited for those who've never used aeroponics systems before
-this small scaled reservoir is perfectly sized to help you get started
with your new sustainable aeroponics endeavors with a small scaled
system that, can typically support up to 10 GroWall System Cells.
Also ideally suited for mounting to walls above countertops,
desktops and more -this small sized reservoir base allows both new and
experienced aeroponics users alike to make the most of all of their
home's potential growing spaces by including mid-wall-mounted assemblies
that, can fit nearly anywhere you wish to grow your plants and produce
throughout your home.
Product Details:
Only measuring 110mm (4 - 1/2 in.) wide, 110mm (4 - 1/2 in.) from the
wall and, 182mm ( 7 - 1/4 in.) tall -this reservoir is small enough to
easily fit within nearly any small space you'd like to include in your
sustainable indoor gardening endeavors.
Despite their small size, they're able to hold and cycle enough water
throughout your GroWall System assembly to keep your plants growing
healthy and strong all year round with a once a day refilling cycle. Its
7 1/4 inch deep well design ensures your submersible water pump will
make the most of the 1.7 liters (.45 gallons) of water it contains to
keep your plants fed with nutrient rich mist throughout the entirety of
its use.
Our GroWall System Top Cell Plug is a small yet, pivotal component in
our GroWall System that, attaches to the top of the upper most GroWall
System Cell -to keep the nutrient enriched water cycling back through the
assembly to drain back into the series of cells of your unique assembly down
into the GroWall System Reservoir where it can be pumped back through
the system again in a continuous cycle.
Product Details:
The depth of the plug is 19mm with a diameter of 7mm to snugly fit
the water pipeline port. This ensures it fits tightly into the uppermost
cell's water pipeline port. This ensures a tight seal at the end of
your pipeline to prevent leakage when water is running through the
system.
A crossbar linked ridged drainage lock insert fits within the
adjacent drainage port while, the attached knuckled rear panel lock bar
fits over the two rear plug locking nodes located on the upper back
panel of each cell. This ensures the plug won't come loose during the
system's use.
Every GroWall System assembly needs only one plug to operate properly
no matter how many GroWall Cells are stacked in the assembly's series.
This is why its offered/sold separately from the GroWall System Cells
which, are intended to be purchased in multiples to meet your desired
plant production goals with each of your GroWall System assemblies.
This product is offered through our online 3D printable product store, RFCINCo Designs. It comes in 10 matching color options and, are also 3D printed as soon as you order it using durable, versatile plastic -to ensure it serves its function for years of continuous use.